LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Air Conditioning System - Diagnostic Codes (2 Of 2) & Symptom Tests) (Hybrid)) >> AIR CONDITIONING SYSTEM (for HV Model) >> DTC B1498: Communication Malfunction (A/C Inverter Local) [10/2018 - ] >> Description

DTC B1498: Communication Malfunction (A/C Inverter Local) [10/2018 - ]: Description

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus UX 250h, 2023 Lexus UX 250h, 2022 Lexus UX 250h, 2021 Lexus UX 250h, and 2020 Lexus UX 250h. However, it is still accessible from the selected car via links, so may be relevant.

The hybrid vehicle control ECU and compressor with motor assembly communicate via direct line. Compressor control is stopped and this DTC is stored if communication information is cut off or abnormal information is received.

This DTC is also detected if high-voltage electricity supplied from the inverter with converter assembly to the compressor control circuit is shut off.

This DTC will be stored as a history DTC.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory
B1498 Communication Malfunction (A/C Inverter Local)
  • Error in communication line between the hybrid vehicle control ECU and compressor with motor assembly
  • Open in communication line between the hybrid vehicle control ECU and compressor with motor assembly
  • High-voltage power source shut off
  • Harness or connector
  • Hybrid vehicle control ECU
  • Compressor with motor assembly
  • HV air conditioning wire
  • Battery state sensor assembly
Memorized

DTC Detection Conditions

  Vehicle Condition
Pattern 1 Pattern 2 Pattern 3
Diagnosis Condition Power switch on (READY)
Malfunction Status Error in communication line between the hybrid vehicle control ECU and compressor with motor assembly - -
Open in communication line between the hybrid vehicle control ECU and compressor with motor assembly - -
High-voltage power source shut off - -
Detection Time - - -
Number of Trips 1 trip 1 trip 1 trip

HINT: 

DTC will be output when conditions for either of the patterns in the table above are met.