LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Theft Deterrent / Keyless Entry System (Service Information) >> Engine Hood Courtesy Switch >> Installation [07/2022 - ] >> Procedure

Installation [07/2022 - ]: Procedure

  1. INSTALL ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY) 
    1. Connect the hood lock control cable assembly to install the hood courtesy switch (hood lock assembly).
      GTY792264Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Engage the clamp.
    3. Install the hood courtesy switch (hood lock assembly) with the 3 bolts.

      Torque: 8.0 N.m (82 kgf/cm, 71 in.lbf) 

    4. Engage the clamp and connect the connector.
  2. INSTALL NO. 1 AIR CLEANER INLET 

    Refer to PROCEDURE - Step 22

  3. INSTALL FRONT BUMPER ASSEMBLY (for Sport Package) 

    Refer to INSTALLATION [07/2022 - ]

  4. INSTALL FRONT BUMPER ASSEMBLY (except Sport Package) 

    Refer to INSTALLATION [07/2022 - ]

scientia non olet · About LEMON Manuals