LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System / Washer System (Service Information) >> Rain Sensor >> Removal [10/2018 - ] >> Procedure

Removal [10/2018 - ]: Procedure

  1. REMOVE RAIN SENSOR COVER 
    1. Release the stopper by pulling it out as shown in the illustration.
      GTY806401Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Stopper
      Release
      Remove in this Direction
    2. Disconnect the rain sensor cover with rain sensor from the windshield glass as shown in the illustration.
    3. Disengage the claws and guide to remove the rain sensor cover.
      GTY746450Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE RAIN SENSOR 
    1. Disconnect the connector to remove the rain sensor.
      GTY769829Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals