LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Luxury >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System (Interior) (Service Information) >> Vanity Light Switch >> Removal [10/2018 - ] >> Procedure

Removal [10/2018 - ]: Procedure

  1. REMOVE VISOR BRACKET COVER 
    1. Using a molding remover A, disengage the claws to remove the visor bracket cover as shown in the illustration.
      GTY780862Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
  2. REMOVE VISOR ASSEMBLY 
    1. Using a T10H "TORX" driver, remove the 2 screws.
      GTY803363Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the guide to remove the visor assembly.
scientia non olet · About LEMON Manuals