LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Electronically Controlled Brake System (Diagnostic Codes (2 Of 2) & Circuit Tests) (Except Hybrid) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model) >> DTC P0571-12: Brake Switch "A" Circuit Short to Battery [10/2018 - 07/2022] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:
  • Inspect the fuses for circuits related to this system before performing the following procedure.
  • After replacing the skid control ECU (brake actuator assembly), perform acceleration sensor zero point calibration and store system information memorization.

    Refer to UTILITY [10/2018 - 07/2022]

  • DTC precaution

    Refer to PRECAUTION [10/2018 - 07/2022]

    PROCEDURE TO CLEAR WARNING LIGHTS (WHEN NOT CLEARING DTCS)

    Procedure
    1. Repair or replacement.
    2. Turn the engine switch on (IG).
    3. Drive the vehicle and depress the brake pedal 2 or 3 times to clear the warning lights.
scientia non olet · About LEMON Manuals