DTC C124E-62: Wheel Speed Sensor Signal Compare Failure [10/2018 - 07/2022]: Description
The skid control ECU (brake actuator assembly) measures the speed of each wheel by receiving signals from each speed sensor.
These signals are used for recognizing that all four wheels are operating properly.
Therefore, signals from all wheels must be equal.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C124E-62 | Wheel Speed Sensor Signal Compare Failure |
|
|
DTC DETECTION CONDITIONS: C124E-62
| Vehicle Condition | |||
|---|---|---|---|
| Pattern 1 | Pattern 2 | ||
| Diagnosis Condition | - | - | - |
| Malfunction Status | Abnormal pulse signals from 2 or more sensors. | ◦ | - |
| Discrepancy among four wheel speed sensor output. | - | ◦ | |
| Detection Time | - | - | |
| Number of Trips | 1 trip | 1 trip | |
HINT:
DTC will be output when conditions for either of the patterns in the table above are met.