Caution / Notice / Hint

NOTE:

Because this DTC is related to a temporary loss of steering angle zero point calibration, before proceeding with the inspection, it is useful to confirm whether the power source voltage was interrupted by an operation such as removal or disconnection of the battery.

HINT:

When DTC U0074-88 and/or U0126-87 is output together with DTC C0526-46, inspect and repair the trouble areas indicated by DTC U0074-88 and/or U0126-87 first.
Refer to DTC U0074-88: Control Module Communication Bus "B" Off Bus Off; DTC U0100-87: Lost Communication with ECM/PCM "A" Missing Message; DTC U0101-87: Lost Communication with TCM Missing Message; DTC U0125-87: Lost Communication With Multi-axis Acceleration Sensor Module Missing Message; DTC U0126-87: Lost Communication with Steering Angle Sensor Module Missing Message; DTC U0131-87: Lost Communication With Power Steering Control Module Missing Message; DTC U0140-87: Lost Communication with Body Control Module Missing Message; DTC U0151-87: Lost Communication with Restraints Control Module Missing Message [10/2018 - 07/2022]
If a speed sensor, yaw rate and acceleration sensor (airbag ECU assembly) is malfunctioning, the steering sensor may also appear to be malfunctioning even when normal.
If DTCs related to a speed sensor, yaw rate and acceleration sensor (airbag ECU assembly) are output, perform troubleshooting for those DTCs before inspecting the steering sensor.