LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Electronically Controlled Brake System (Diagnostic Codes (2 Of 2) & Circuit Tests) (Except Hybrid) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model) >> DTC C0526-2A: Steering Angle Sensor Module Signal Stuck In Range [10/2018 - 07/2022] >> Description

DTC C0526-2A: Steering Angle Sensor Module Signal Stuck In Range [10/2018 - 07/2022]: Description

The skid control ECU (brake actuator assembly) determines the steering angle value based on data obtained from the steering sensor, yaw rate and acceleration sensor (airbag ECU assembly).

DTC No. Detection Item DTC Detection Condition Trouble Area
C0526-2A Steering Angle Sensor Module Signal Stuck In Range When the change in steering sensor angle is 5° or less, left and right movements of the vehicle are detected. Steering sensor
scientia non olet · About LEMON Manuals