LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Electronically Controlled Brake System (Diagnostic Codes (2 Of 2) & Circuit Tests) (Except Hybrid) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model) >> DTC C0520-2A: Multi-axis Acceleration Sensor Module "A" Signal Stuck In Range [10/2018 - 07/2022] >> Procedure

DTC C0520-2A: Multi-axis Acceleration Sensor Module "A" Signal Stuck In Range [10/2018 - 07/2022]: Procedure

  1. REPLACE AIRBAG ECU ASSEMBLY 
    1. Replace the yaw rate and acceleration sensor (airbag ECU assembly).

      Refer to REMOVAL [10/2018 - 07/2022]

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    END 

scientia non olet · About LEMON Manuals