LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Electronically Controlled Brake System (Diagnostic Codes (2 Of 2) & Circuit Tests) (Except Hybrid) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model) >> DTC C0520-2A: Multi-axis Acceleration Sensor Module "A" Signal Stuck In Range [10/2018 - 07/2022] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:

After replacing or reinstalling the yaw rate and acceleration sensor (airbag ECU assembly), perform acceleration sensor zero point calibration and store system information memorization after performing "Reset Memory".

Refer to UTILITY [10/2018 - 07/2022]

scientia non olet · About LEMON Manuals