LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> UX 200 Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Electronically Controlled Brake System (Diagnostic Codes (2 Of 2) & Circuit Tests) (Except Hybrid) >> ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model) >> ABS Operates Before Necessary When Braking [10/2018 - 07/2022] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:
  • After replacing or removing and installing a speed sensor, perform Dealer Mode (Signal Check) inspection to confirm that the speed sensors are operating correctly.

    Refer to TEST MODE PROCEDURE [10/2018 - 07/2022]

  • After replacing or removing and installing a speed sensor rotor, perform Dealer Mode (Signal Check) inspection to confirm that the speed sensors are operating correctly.

    Refer to TEST MODE PROCEDURE [10/2018 - 07/2022]

scientia non olet · About LEMON Manuals