LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> RX 450hL >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Panels / Trim - Service Information (1 Of 2) >> Rear Spoiler >> Removal [10/2015 - 03/2018] >> Procedure

Removal [10/2015 - 03/2018]: Procedure

  1. REMOVE BACK WINDOW UPPER PANEL TRIM 

    Refer to PROCEDURE - Step 1

  2. REMOVE REAR SPOILER SUB-ASSEMBLY 
    1. Disconnect the 2 connectors.
      GTY618427Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 hole plugs.
      GTY658829Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the 4 bolts and 3 nuts.
      GTY793213Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Apply protective tape around the rear spoiler sub-assembly.
      GTY639351Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Protective Tape
    5. Disengage the 6 clips as shown in the illustration to remove the rear spoiler sub-assembly.
      GTY679889Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
  3. REMOVE SIDE REAR SPOILER PROTECTOR SUB-ASSEMBLY LH 
    1. Apply protective tape around the side rear spoiler protector sub-assembly LH.
      GTY652973Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Protective Tape
    2. Disengage the 4 clips as shown in the illustration to remove the side rear spoiler protector sub-assembly LH.
      GTY674653Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Clip <A>
      Remove in this Direction
    3. Remove the 3 clips <A>.
  4. REMOVE SIDE REAR SPOILER PROTECTOR SUB-ASSEMBLY RH 

    HINT: 

    Use the same procedure as for the LH side.

scientia non olet · About LEMON Manuals