LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> RX 450h Base >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System / Washer System (Service Information) >> Headlight Cleaner Actuator >> Removal [08/2019 - ] >> Procedure

Removal [08/2019 - ]: Procedure

  1. REMOVE FRONT BUMPER ASSEMBLY 

    Refer to REMOVAL [08/2019 - ]

  2. REMOVE HEADLIGHT WASHER COVER LH 

    See step  1

  3. REMOVE HEADLIGHT WASHER COVER RH 

    HINT: 

    Use the same procedure as for the LH side.

  4. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH 
    1. Disengage the claw and disconnect the No. 4 headlight cleaner hose as shown in the illustration.
      GTY961401Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Push
      Disconnect in this Direction
    2. Remove the screw.
      GTY960851Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the claw and guide as indicated by the arrows, in the order shown in the illustration to remove the headlight washer actuator sub-assembly LH.
      GTY960505Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction (1) Remove in this Direction (2)
      Remove in this Direction (3) - -
  5. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH 

    HINT: 

    Use the same procedure as for the LH side.

scientia non olet · About LEMON Manuals