LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> RX 450h Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Exterior Lights >> Lighting System (Exterior) (Service Information) (2 Of 2) >> Rear Light Assembly >> Reassembly [10/2015 - 08/2019] >> Procedure

Reassembly [10/2015 - 08/2019]: Procedure

  1. INSTALL REAR LIGHT LENS AND BODY 
  2. INSTALL LICENSE PLATE LIGHT SHADE 
    1. Install 2 new license plate light shades.
      GTY646217Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL REAR LIGHT GASKET 
    1. Install a new rear light gasket.
      GTY646219Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL BACK-UP LIGHT SOCKET AND WIRE 
    1. Connect the connector to install the back-up light socket and wire.
      GTY646218Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL BACK-UP LIGHT BULB 
    1. Install the back-up light bulb to the back-up light socket and wire.
    2. Turn the back-up light socket and wire with the back-up light bulb as shown in the illustration to connect them as a unit.
      GTY650396Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction
scientia non olet · About LEMON Manuals