LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> RX 450h Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Exterior Lights >> Lighting System (Exterior) (Service Information) (1 Of 2) >> Side Turn Signal Light Assembly >> Inspection [10/2015 - ] >> Procedure

Inspection [10/2015 - ]: Procedure

  1. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH 
    1. Apply auxiliary battery voltage to the side turn signal light LH and check that the light comes on.
      GTY676552Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Side Turn Signal Light Assembly LH)

      OK

      Condition Specified Condition
      Auxiliary battery positive (+) → Terminal 1
      Auxiliary battery negative (-) → Terminal 2      		 Side turn signal light comes on

      If the result is not as specified, replace the side turn signal light assembly LH.

  2. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH 
    1. Apply auxiliary battery voltage to the side turn signal light RH and check that the light comes on.
      GTY630897Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Side Turn Signal Light Assembly RH)

      OK

      Condition Specified Condition
      Auxiliary battery positive (+) → Terminal 1
      Auxiliary battery negative (-) → Terminal 2      		 Side turn signal light comes on

      If the result is not as specified, replace the side turn signal light assembly RH.

scientia non olet · About LEMON Manuals