LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> RX 450h Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Exterior Lights >> Lighting System (Exterior) (Service Information) (1 Of 2) >> Headlight Assembly >> Disassembly [08/2019 - ] >> Procedure

Disassembly [08/2019 - ]: Procedure

  1. REMOVE FRONT TURN SIGNAL LIGHT BULB (for Bulb Type Turn Signal Light) 
    1. Disconnect the connector.
      GTY960600Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Turn the front turn signal light socket with the front turn signal light bulb as shown in the illustration to remove them as a unit.
      GTY961474Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
    3. Remove the front turn signal light bulb from the front turn signal light socket.
  2. REMOVE FRONT TURN SIGNAL LIGHT SOCKET (for Bulb Type Turn Signal Light) 
  3. REMOVE FRONT SIDE MARKER LIGHT BULB (for Bulb Type Turn Signal Light) 
    1. Disconnect the connector.
      GTY961678Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Turn the front side marker light socket with the front side marker light bulb as shown in the illustration to remove them as a unit.
      GTY961229Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
    3. Remove the front side marker light bulb from the front side marker light socket.
  4. REMOVE FRONT SIDE MARKER LIGHT SOCKET (for Bulb Type Turn Signal Light) 
  5. REMOVE NO. 1 HEADLIGHT ECU SUB-ASSEMBLY (w/ Automatic Headlight Beam Level Control System) 

    Refer to PROCEDURE - Step 2

  6. REMOVE HEADLIGHT GASKET (w/ Automatic Headlight Beam Level Control System) 

    Refer to PROCEDURE - Step 3

  7. REMOVE HEADLIGHT UNIT 
scientia non olet · About LEMON Manuals