Installation [03/2018 - ]: Procedure

INSTALL NO. 1 AMPLIFIER ANTENNA ASSEMBLY

Engage the 2 guides.

Install the No. 1 amplifier antenna assembly with the bolt.

for Type A

Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf)

for Type B

Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTE:

There are two types of bolts and the tightening torque depends on the type of bolt used as shown in the illustration. Therefore, confirm the tightening torque before installing the bolt.

*A	for Type A
*B	for Type B

Connect 2 connectors.

INSTALL BACK DOOR TRIM PANEL ASSEMBLY
Refer to PROCEDURE - Step 27 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 29 [08/2019 - ]
INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
Refer to PROCEDURE - Step 4 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 3 [08/2019 - ]
INSTALL DOOR PULL HANDLE
Refer to PROCEDURE - Step 29 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 31 [08/2019 - ]
INSTALL BACK DOOR TRIM BASE
Refer to PROCEDURE - Step 30 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 32 [08/2019 - ]
INSTALL BACK DOOR LOCK COVER
Refer to PROCEDURE - Step 32 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 34 [08/2019 - ]
INSTALL BACK DOOR TRIM COVER LH
Refer to PROCEDURE - Step 34 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 36 [08/2019 - ]
INSTALL BACK DOOR TRIM COVER RH
HINT:

Use the same procedure as for the LH side.
INSTALL BACK WINDOW UPPER PANEL TRIM
Refer to PROCEDURE - Step 37 [03/2018 - 08/2019] , or refer to PROCEDURE - Step 39 [08/2019 - ]