LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> RX 350L FWD >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System - Service Information >> Oil Pressure Switch >> Removal [09/2015 - ] >> Procedure

Removal [09/2015 - ]: Procedure

  1. REMOVE FRONT FENDER APRON SEAL RH 

    Refer to PROCEDURE - Step 14 [09/2015 - 08/2016] , or refer to PROCEDURE - Step 14 [08/2016 - 12/2017] , or refer to PROCEDURE - Step 14 [12/2017 - 08/2019] , or refer to PROCEDURE - Step 16 [08/2019 - ]

  2. DRAIN ENGINE OIL 

    See step  1 [09/2015 - 07/2021], or see step  1 [07/2021 - ]

  3. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY 
    1. Disconnect the wire harness protector.
      GTY625343Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Wire Harness Protector
    2. Disconnect the engine oil pressure switch assembly connector.
    3. Using a 24 mm deep socket wrench, remove the engine oil pressure switch assembly.
      GTY666516Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals