LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> RX 350L FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) - Service Information (1 Of 2) >> Back Door Closer Ecu >> Removal [12/2017 - 08/2019] >> Procedure

Removal [12/2017 - 08/2019]: Procedure

  1. REMOVE BACK WINDOW UPPER PANEL TRIM (w/o Rear No. 2 Seat) 

    See step  1

  2. REMOVE BACK WINDOW UPPER PANEL TRIM (w/ Rear No. 2 Seat) 

    See step  2

  3. REMOVE BACK DOOR TRIM COVER LH (w/o Rear No. 2 Seat) 

    See step  3

  4. REMOVE BACK DOOR TRIM COVER LH (w/ Rear No. 2 Seat) 

    See step  4

  5. REMOVE BACK DOOR TRIM COVER RH 

    HINT: 

    Use the same procedure as for the LH side.

  6. REMOVE BACK DOOR LOCK COVER (w/o Rear No. 2 Seat) 

    See step  6

  7. REMOVE BACK DOOR LOCK COVER (w/ Rear No. 2 Seat) 

    See step  7

  8. REMOVE BACK DOOR TRIM BASE 

    See step  8

  9. REMOVE DOOR PULL HANDLE 

    See step  9

  10. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY 

    Refer to PROCEDURE - Step 3

  11. REMOVE BACK DOOR TRIM PANEL ASSEMBLY (w/o Rear No. 2 Seat) 

    See step  11

  12. REMOVE BACK DOOR TRIM PANEL ASSEMBLY (w/ Rear No. 2 Seat) 

    See step  12

  13. REMOVE MULTIPLEX NETWORK DOOR ECU 
    1. Disconnect the 2 connectors.
      GTY623261Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 bolts.
      GTY623262Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the 2 guides to remove the multiplex network door ECU.
scientia non olet · About LEMON Manuals