Components [09/2015 - 12/2017]

Fig 1: Instrument Panel Safety Pad Replacement Components With Torque Specifications (1 Of 8)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Callout	Description	Callout	Description
*1	COMBINATION METER ASSEMBLY	*2	COWL SIDE TRIM BOARD LH
*3	FRONT DOOR SCUFF PLATE LH	*4	HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
*5	INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY	*6	INSTRUMENT PANEL GARNISH LH
*7	LOWER INSTRUMENT FINISH PANEL SUB	*8	LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
*9	LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY	*10	NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
	Nm (kgfcm, ft.*lbf): Specified torque	-	-

Fig 2: Instrument Panel Safety Pad Replacement Components (2 Of 8)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*A	for 8 Inch Display	*B	for 12.3 Inch Display
*1	ACCESSORY METER ASSEMBLY	*2	CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
*3	CONSOLE BOX ASSEMBLY	*4	COOLER (ROOM TEMP. SENSOR) THERMISTOR
*5	INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY	*6	MULTI-DISPLAY ASSEMBLY
*7	RADIO RECEIVER ASSEMBLY WITH REGISTER	-	-

Fig 3: Instrument Panel Safety Pad Replacement Components (3 Of 8)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*1	COWL SIDE TRIM BOARD RH	*2	FRONT DOOR SCUFF PLATE RH
*3	GLOVE COMPARTMENT DOOR ASSEMBLY	*4	INSTRUMENT PANEL GARNISH RH
*5	NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY	-	-

Fig 4: Instrument Panel Safety Pad Replacement Components (4 Of 8)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

*A	for LH Side	*B	for RH Side
*1	FRONT NO. 2 SPEAKER ASSEMBLY	*2	FRONT NO. 3 SPEAKER ASSEMBLY
*3	FRONT PILLAR GARNISH LH	*4	FRONT PILLAR GARNISH RH
*5	NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY	*6	NO. 1 SPEAKER OPENING COVER ASSEMBLY
*7	NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY	*8	FRONT PILLAR GARNISH CLIP
*9	CLIP	-	-
•	Non-reusable part	-	-

Fig 5: Instrument Panel Safety Pad Replacement Components With Torque Specifications (5 Of 8)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Callout	Description	Callout	Description
*1	FRONT NO. 1 CONSOLE BOX INSERT	*2	FRONT NO. 2 CONSOLE BOX INSERT
*3	INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY	*4	NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
*5	NO. 2 INSTRUMENT CLUSTER MOULDING	-	-
	Nm (kgfcm, ft.*lbf): Specified torque	-	-

Fig 6: Instrument Panel Safety Pad Replacement Components (6 Of 8)

*A	w/ Headup Display	-	-
*1	DEFROSTER NOZZLE ASSEMBLY	*2	HEADUP DISPLAY (METER MIRROR SUB-ASSEMBLY)
*3	INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY	*4	NAVIGATION ANTENNA ASSEMBLY WITH BRACKET
*5	NO. 1 HEATER TO REGISTER DUCT	*6	NO. 1 METER HOOD RETAINER
*7	NO. 1 SIDE DEFROSTER NOZZLE DUCT	*8	NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
*9	NO. 2 SIDE DEFROSTER NOZZLE DUCT	*10	NO. 4 HEATER TO REGISTER DUCT

Fig 7: Instrument Panel Safety Pad Replacement Components (7 Of 8)

*A	w/o Headup Display	*B	w/ Headup Display
*C	for TMMC Made	*D	w/o Manual (SOS) Switch
*E	w/ Manual (SOS) Switch	-	-
*1	ANTENNA CORD SUB-ASSEMBLY	*2	AUTOMATIC LIGHT CONTROL SENSOR
*3	NO. 1 DEFROSTER NOZZLE GARNISH	*4	NO. 1 INSTRUMENT PANEL PIN
*5	NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY	*6	NO. 1 SIDE DEFROSTER NOZZLE
*7	NO. 2 INSTRUMENT PANEL WIRE	*8	NO. 2 SIDE DEFROSTER NOZZLE

Fig 8: Instrument Panel Safety Pad Replacement Components (8 Of 8)

GLOVE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY

GLOVE COMPARTMENT DOOR ASSEMBLY