LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> RC 350 Base, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System - Service Information >> Multi-Display >> Removal [10/2022 - ] >> Procedure

Removal [10/2022 - ]: Procedure

  1. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 8 Inch Display) 

    Refer to PROCEDURE - Step 29

  2. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 10.3 Inch Display) 

    Refer to PROCEDURE - Step 30

  3. REMOVE MULTI-DISPLAY ASSEMBLY WITH BRACKET 
    1. Disconnect each connector.
      GTY970754Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the clamp.
    3. Remove the 2 bolts.
      GTY970758Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Disengage the 2 clips to remove the multi-display assembly with bracket as shown in the illustration.
      GTY970756Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE NO. 1 MULTI-DISPLAY BRACKET 
    1. for 8 Inch Display:
      1. Remove the 6 screws and No. 1 multi-display bracket.
        GTY970687Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. for 10.3 Inch Display:
      1. Remove the 3 screws and No. 1 multi-display bracket.
        GTY970805Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE MULTI-DISPLAY ASSEMBLY 
scientia non olet · About LEMON Manuals