LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> LS 500h RWD >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Hybrid Transaxle System (L310) - Service Information (2 Of 2) >> Shift Lever >> Removal [10/2017 - 10/2023] >> Procedure

Removal [10/2017 - 10/2023]: Procedure

  1. REMOVE CONSOLE BOX ASSEMBLY 

    Refer to REMOVAL [10/2017 - 10/2020] , or refer to REMOVAL [10/2020 - 10/2022] , or refer to REMOVAL [10/2022 - 10/2023]

  2. REMOVE NO. 1 CONSOLE BOX DUCT 
    1. Remove the 2 clips and No. 1 console box duct.
      GTY777726Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE SHIFT POSITION INDICATOR 

    HINT: 

    Perform this procedure only when replacing the shift position indicator.

    1. Remove the 2 screws, 2 claws and shift position indicator from the console upper panel assembly.
      GTY799676Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY 
    1. GTY832639Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Disconnect the 2 clamps.

    2. Disconnect the transmission floor shift assembly connector.
      GTY799314Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the 4 bolts and transmission floor shift assembly from the body.
      GTY799690Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals