LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> LS 500h RWD >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension System (Rear) - Service Information (1 Of 2) >> Toe Control Link >> On-Vehicle Inspection [10/2017 - ] >> Procedure

On-Vehicle Inspection [10/2017 - ]: Procedure

  1. INSPECT TOE CONTROL LINK SUB-ASSEMBLY LH 
    1. Check for looseness.
      1. Lift up the vehicle.
      2. Move the toe control link sub-assembly LH up and down then left and right by hand to check that there is no looseness at the toe control link sub-assembly LH.
        GTY805608Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals