LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> LS 500h RWD >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension System (Rear) - Service Information (1 Of 2) >> Rear Pneumatic Cylinder >> Inspection [10/2017 - ] >> Procedure

Inspection [10/2017 - ]: Procedure

  1. INSPECT REAR PNEUMATIC CYLINDER WITH SHOCK ABSORBER ASSEMBLY 
    1. Extend the rear pneumatic cylinder with shock absorber assembly and check that it is as described below.

      Standard

      While extending the cylinder at a constant speed, the load is constant for each stroke and there is no abnormal feedback or noises. Also, the cylinder returns at a constant speed when extended.

      NOTE:

      When extending the rear pneumatic cylinder with shock absorber assembly, do not block the air inlet/outlet opening.

      HINT: 

      If an abnormality is found, replace the rear pneumatic cylinder with shock absorber assembly with a new one.

scientia non olet · About LEMON Manuals