Installation [10/2020 - ]: Procedure

1. Insert the rear suspension arm attachment sub-assembly from the back of the vehicle. Then temporarily tighten the rear No. 2 suspension toe adjust plate and rear No. 2 suspension arm assembly LH with the nut.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Insert the bolt from the front of the vehicle. Then temporarily tighten the rear No. 2 suspension arm assembly LH with the washer and nut.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Temporarily tighten the rear stabilizer link assembly LH to the rear No. 2 suspension arm assembly LH with the bolt and nut.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the rear height control sensor sub-assembly LH to the rear No. 2 suspension arm assembly LH with the bolt.

   Torque: 5.4 N.m (55 kgf/cm, 48 in.lbf) 

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Insert the bolt from the back of the vehicle. Then temporarily tighten the lower control arm assembly LH with the nut.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   	Bolt
   	Nut

2. Temporarily tighten the lower control arm assembly LH with a new nut.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

See step  4

1. Fully tighten the lower control arm assembly LH with the bolt.

   Torque: 126 N.m (1285 kgf/cm, 93 ft.lbf) 

   NOTE:

   Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   	Bolt
   	Nut

2. Fully tighten the nut.

   Torque: 118 N.m (1203 kgf/cm, 87 ft.lbf) 

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Fully tighten the rear No. 2 suspension arm assembly LH with the nut.

   Torque: 213 N.m (2172 kgf/cm, 157 ft.lbf) 

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Fully tighten the nut.

   Torque: 165 N.m (1683 kgf/cm, 122 ft.lbf) 

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Fully tighten the nut.

   Torque: 24 N.m (245 kgf/cm, 18 ft.lbf) 

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Refer to PROCEDURE - Step 7

Refer to INSTALLATION [10/2017 - 10/2023] , or refer to INSTALLATION [10/2023 - ]

Refer to ADJUSTMENT [10/2020 - 10/2022] , or refer to ADJUSTMENT [10/2022 - 10/2023] , or refer to ADJUSTMENT [10/2023 - ]

Refer to ADJUSTMENT [10/2020 - 10/2023] , or refer to ADJUSTMENT [10/2023 - ]

Refer to WORK PROCEDURE [10/2020 - 11/2021] , or refer to WORK PROCEDURE [11/2021 - 10/2022] , or refer to WORK PROCEDURE [10/2022 - 10/2023] , or refer to WORK PROCEDURE [10/2023 - ]

Refer to ADJUSTMENT [10/2020 - ]