LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> LS 500h RWD >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Audio / Video System - Diagnostic Codes (3 Of 3) & Symptom Tests (1 Of 2) >> Audio And Visual System >> Cellular Phone Registration Failure [10/2022 - ] >> Procedure

Cellular Phone Registration Failure [10/2022 - ]: Procedure

  1. CHECK USAGE CONDITIONS 
    1. Check that the vehicle and cellular phone meet the following conditions:
      NOTE:

      If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer first.

      • The operation of the cellular phone has been confirmed
      • The "Bluetooth" setting of the cellular phone is set to on
      • The Wi-Fi setting of the cellular phone is set to off
      • The operating system and software of the "Bluetooth" device are the latest versions
      • There are no other radio wave emitting devices (Wi-Fi communication device, etc., which emit radio waves in the 2.4 GHz frequency band) inside the vehicle.
    2. Perform the registration procedure for the cellular phone again and check that it registers correctly.

      HINT: 

      If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

      Result

      Result Proceed to
      Cellular phone can be registered. A
      Cellular phone cannot be registered. B

    Result: 

    END 

    Result: 

    See step  2

  2. RESTART 
    1. Turn off the cellular phone and then turn it on again.
    2. Turn the ignition switch off and then turn it to ON again.
    3. Perform the registration procedure for the cellular phone again and check that it registers correctly.

      HINT: 

      If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

      Result

      Result Proceed to
      Cellular phone can be registered. A
      Cellular phone cannot be registered. B

    Result: 

    END 

    Result: 

    See step  3

  3. MOVE CELLULAR PHONE 
    1. Move the cellular phone close to the in-vehicle device.
    2. Perform the registration procedure for the cellular phone again and check that it registers correctly.

      HINT: 

      If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

      Result

      Result Proceed to
      Cellular phone can be registered. A
      Cellular phone cannot be registered. B

    Result: 

    END 

    Result: 

    See step  4

  4. CLEAR REGISTERED DEVICE INFORMATION 
    1. Clear all "Bluetooth" devices registered to the cellular phone and in-vehicle device.
    2. Perform the registration procedure for the cellular phone again and check that it registers correctly.

      HINT: 

      If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

      Result

      Result Proceed to
      Cellular phone can be registered. A
      Cellular phone cannot be registered. B

    Result: 

    END 

    Result: 

    See step  5

  5. CHECK OPERATION USING OTHER VEHICLE 
    1. Using another vehicle, perform the registration procedure for the cellular phone again and check that it registers correctly.

      HINT: 

      • Make sure to obtain the permission of the customer first.
      • After the inspection, clear the registered information and usage history acquired during the inspection.
      • If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

      Result

      Result Proceed to
      Cellular phone can be registered. A
      Cellular phone cannot be registered. B

    Result: 

    REPLACE RADIO RECEIVER ASSEMBLY. Refer to  REMOVAL [10/2022 - ] 

    Result: 

    See step  6

  6. REPLACE CELLULAR PHONE 
    1. Using another "Bluetooth" compatible cellular phone, perform the registration procedure and check that it registers correctly.

      HINT: 

      • Make sure to obtain the permission of the customer first.
      • After the inspection, clear the registered information and usage history acquired during the inspection.
      • If operation of the cellular phone or radio and display receiver assembly is requested, make sure to follow the instructions closely and perform the operation.

      Result

      Result Proceed to
      Cellular phone can be registered. A
      Cellular phone cannot be registered. B

    Result: 

    CELLULAR PHONE MALFUNCTION (CHECK CUSTOMER`S CELLULAR PHONE) 

    Result: 

    REPLACE RADIO RECEIVER ASSEMBLY. Refer to  REMOVAL [10/2022 - ]