LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> LS 500h AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Acoustic Vehicle Alerting System - Service Information) >> Vehicle Approaching Speaker >> Removal [10/2023 - ] >> Procedure

Removal [10/2023 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus LS 500h, 2023 Lexus LS 500h, 2022 Lexus LS 500h, and 2021 Lexus LS 500h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT BUMPER ASSEMBLY 

    Refer to REMOVAL [10/2023 - ]

  2. REMOVE VEHICLE APPROACHING SPEAKER ASSEMBLY 
    NOTE:
    • When removing the vehicle approaching speaker, take care not to damage it.
    • Do not reuse a vehicle approaching speaker that has been dropped or subjected to a strong shock.
    • Do not push the vehicle approaching speaker assembly center area.
    1. Remove the bolt.
      GTY966158Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Bolt
      Connector
    2. Detach the guide and remove the vehicle approaching speaker assembly.
    3. Disconnect the connector.
scientia non olet · About LEMON Manuals