LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> LS 500h AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Lidar System - Service Information (1 Of 2)) >> LiDAR SENSOR CLEANER NOZZLE (for Rear Side) >> Removal [10/2022 - 10/2023] >> Procedure

Removal [10/2022 - 10/2023]: Procedure

WARNING: This page is about a different car, the 2024 Lexus LS 500h, 2023 Lexus LS 500h, and 2022 Lexus LS 500h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE REAR LIDAR CLEANER COVER 

    See step  1

  2. REMOVE REAR LIDAR ADVANCED DRIVE SENSOR ASSEMBLY 

    Refer to REMOVAL [10/2022 - 10/2023]

  3. REMOVE REAR LIDAR CLEANER NOZZLE 
    1. Remove the clamp and rear LiDAR cleaner nozzle.
      GTY1085177Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
scientia non olet · About LEMON Manuals