LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> LS 500h AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Advanced Driver Assistance System - Service Information (2 Of 2)) >> Millimeter Wave Radar Sensor >> Removal [10/2020 - 11/2021] >> Procedure

Removal [10/2020 - 11/2021]: Procedure

WARNING: This page is about a different car, the 2024 Lexus LS 500h, 2023 Lexus LS 500h, 2022 Lexus LS 500h, and 2021 Lexus LS 500h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT BUMPER ASSEMBLY 

    Refer to REMOVAL [10/2020 - 11/2021]

  2. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY 
    NOTE:

    Do not reuse the millimeter wave radar sensor assembly if it has been dropped or subjected to a severe impact.

    1. Remove the 2 bolts and screw.
      GTY789176Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Screw
      Bolt
    2. Detach the guide and remove the millimeter wave radar sensor assembly.
scientia non olet · About LEMON Manuals