LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> LS 500h AWD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Sub Battery System - Service Information >> Sub Battery >> Installation [10/2020 - 10/2023] >> Procedure

Installation [10/2020 - 10/2023]: Procedure

  1. INSTALL SUB-BATTERY BRACKET 
    1. Install the sub-battery bracket (positive (+) terminal side) to the sub-battery module assembly with the 2 bolts.

      for bolt A 

      Torque: 5.5 N.m (56 kgf/cm, 49 in.lbf) 

      for bolt B 

      Torque: 4.5 N.m (46 kgf/cm, 40 in.lbf) 

      Bolt Length

      Item Length (Distance from the Seat)
      Bolt A 10.4 mm (0.41 in.)
      Bolt B 8 mm (0.31 in.)
    2. Install the sub-battery bracket (negative (-) terminal side) to the sub-battery module assembly with the 2 bolts.

      for bolt A 

      Torque: 5.5 N.m (56 kgf/cm, 49 in.lbf) 

      for bolt B 

      Torque: 4.5 N.m (46 kgf/cm, 40 in.lbf) 

      Bolt Length

      Item Length (Distance from the Seat)
      Bolt A 10.4 mm (0.41 in.)
      Bolt B 8 mm (0.31 in.)
  2. INSTALL SUB-BATTERY MODULE ASSEMBLY 
    1. Install the sub-battery module assembly with the 2 nuts.

      Torque: 8.0 N.m (82 kgf/cm, 71 in.lbf) 

    2. Connect the connector to the sub-battery module assembly.
    3. Connect the 2 sub-battery terminals to the sub-battery module assembly with the 2 nuts.

      Torque: 8.7 N.m (89 kgf/cm, 77 in.lbf) 

  3. INSTALL CONNECTOR COVER 
    1. Attach the 2 claws and install connector cover to the sub-battery module assembly.
  4. INSTALL REAR LUGGAGE COMPARTMENT TRAY BRACKET RH 
    1. Attach the clip and install the rear luggage compartment tray bracket RH.
    2. Install the rope hook assembly with the bolt.

      Torque: 6.5 N.m (66 kgf/cm, 58 in.lbf) 

    3. Attach the claw and close the cap.
  5. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH 

    Refer to PROCEDURE - Step 2 [10/2020 - 11/2021] , or refer to PROCEDURE - Step 2 [11/2021 - 10/2023]

  6. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER 

    Refer to PROCEDURE - Step 4 [10/2020 - 11/2021] , or refer to PROCEDURE - Step 4 [11/2021 - 10/2023]

  7. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER 

    Refer to PROCEDURE - Step 7 [10/2020 - 11/2021] , or refer to PROCEDURE - Step 7 [11/2021 - 10/2023]

  8. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY 

    Refer to PROCEDURE - Step 1

  9. INSTALL INNER LOWER LUGGAGE COMPARTMENT TRIM COVER 

    Refer to PROCEDURE - Step 9 [10/2020 - 11/2021] , or refer to PROCEDURE - Step 9 [11/2021 - 10/2023]

  10. INSTALL REAR FLOOR FINISH PLATE 

    Refer to PROCEDURE - Step 2 [10/2020 - 11/2021] , or refer to PROCEDURE - Step 2 [11/2021 - ]

  11. INSTALL ROPE HOOK ASSEMBLY 

    Refer to PROCEDURE - Step 3 [10/2020 - 11/2021] , or refer to PROCEDURE - Step 3 [11/2021 - ]

  12. INSTALL SIDE TRIM BOX 

    Refer to PROCEDURE - Step 3 [10/2020 - 11/2021] , or refer to PROCEDURE - Step 3 [11/2021 - 10/2023]

  13. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH 

    Refer to PROCEDURE - Step 13 [10/2020 - 11/2021] , or refer to PROCEDURE - Step 13 [11/2021 - 10/2023]

  14. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH 

    Refer to PROCEDURE - Step 12 [10/2020 - 11/2021] , or refer to PROCEDURE - Step 12 [11/2021 - 10/2023]

  15. INSTALL LUGGAGE COMPARTMENT FLOOR MAT 

    Refer to PROCEDURE - Step 14 [10/2020 - 11/2021] , or refer to PROCEDURE - Step 14 [11/2021 - 10/2023]

  16. INSTALL AUXILIARY BATTERY 

    Refer to INSTALLATION [10/2020 - 10/2023]

  17. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL 

    Refer to WORK PROCEDURE [10/2020 - 11/2021] , or refer to WORK PROCEDURE [11/2021 - 10/2022] , or refer to WORK PROCEDURE [10/2022 - ]

    HINT: 

    When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

    Refer to AUTOMATIC LEARNING CHART [10/2020 - 11/2021] , or refer to AUTOMATIC LEARNING CHART [11/2021 - 10/2023]

scientia non olet · About LEMON Manuals