Installation [10/2020 - 11/2021]: Procedure

1. Fig 1: Headup Display Bolts (W/o Advanced Drive) Tightening Sequence

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   	Bolt
   	Connector

   w/o Advanced Drive:

   1. Connect the connector and temporarily install the headup display.
   2. Install the headup display with the 3 bolts in the order shown in the illustration.

      Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

2. Fig 2: Headup Display Bolts (W/ Advanced Drive) Tightening Sequence

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   	Bolt
   	Connector

   w/ Advanced Drive:

   1. Connect the 2 connectors and temporarily install the headup display.
   2. Install the headup display with the 3 bolts in the order shown in the illustration.

      Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

Refer to INSTALLATION [10/2020 - 11/2021]

Refer to PROCEDURE - Step 2

Refer to PROCEDURE - Step 13

Refer to WORK PROCEDURE [10/2020 - 11/2021]

HINT: 

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Refer to AUTOMATIC LEARNING CHART [10/2020 - 11/2021]

• w/ Advanced Park:

  -

• w/o Advanced Park:

  Refer to DTC CHECK / CLEAR [10/2020 - 10/2023]

• w/ Advanced Park:

  -

• w/o Advanced Park:

  Refer to OPERATION CHECK [10/2020 - 11/2021]