LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> LS 500h AWD >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Axle And Differential - Service Information (1 Of 3) >> Steering Knuckle >> Removal [10/2023 - ] >> Procedure

Removal [10/2023 - ]: Procedure

  1. AIR SUSPENSION CONTROL PROHIBITED 

    Refer to PRECAUTION [10/2017 - ]

  2. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY 

    Refer to PROCEDURE - Step 18

  3. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY 

    Refer to PROCEDURE - Step 20

  4. REMOVE STRUT BAR BRACKET SUPPORT SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 22

  5. DISABLE BRAKE CONTROL 

    Refer to PROCEDURE - Step 1

  6. REMOVE FRONT WHEEL 

    Refer to REMOVAL [10/2023 - ]

  7. DISCONNECT FRONT SPEED SENSOR WIRE 

    See step  7

  8. DISCONNECT DISC BRAKE CYLINDER ASSEMBLY 
  9. REMOVE FRONT DISC LH 
  10. INSTALL FRONT AXLE SHAFT NUT LH 

    See step  10

  11. REMOVE FRONT DISC BRAKE DUST COVER LH 

    See step  11

  12. DISCONNECT TIE ROD ASSEMBLY LH 

    Refer to PROCEDURE - Step 16

  13. LOOSEN FRONT SUSPENSION LOWER ARM ASSEMBLY LH 
    1. Loosen the 3 bolts.
      GTY836059Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  14. DISCONNECT FRONT SUSPENSION UPPER ARM 

    Refer to PROCEDURE - Step 3

  15. REMOVE STEERING KNUCKLE LH 
    1. Remove the 3 bolts and steering knucle LH.
      GTY836059Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  16. REMOVE FRONT AXLE HUB SUB-ASSEMBLY LH 

    See step  16

  17. REMOVE DISC BRAKE AIR GUIDE PLATE 
    1. Remove the disc brake air guide plate from the steering knuckle LH.
scientia non olet · About LEMON Manuals