Disassembly [10/2023 - ]: Procedure
- REMOVE OUTER MIRROR LH
See step 1
- REMOVE NO. 2 OUTER MIRROR COVER LH
- Remove the screw.
Protective Tape Using a thin-bladed screwdriver, detach the claw.
HINT:
Tape the thin-bladed screwdriver tip before use.
- Detach the claw and remove the No. 2 outer mirror cover LH (visor cover A).
Remove in this Direction - Remove the 3 screws.
- Using a thin-bladed screwdriver, detach the claw.
Protective Tape HINT:
Tape the thin-bladed screwdriver tip before use.
- Remove the outer mirror tape.
Outer Mirror Tape - Detach the guide and disconnect the connector.
- Detach the claw.
Remove in this Direction - Remove the 2 outer mirror tapes.
Outer Mirror Tape - Detach the guide.
- Disconnect the 2 connectors and remove the No. 2 outer mirror cover LH (visor cover B).
- Remove the screw.
- REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH
Refer to PROCEDURE - Step 3
- REMOVE SIDE TELEVISION CAMERA ASSEMBLY LH
Refer to PROCEDURE - Step 3
- REMOVE PARKING ASSIST LIGHT LH
Refer to PROCEDURE - Step 3
- REMOVE OUTER MIRROR ACTUATOR ASSEMBLY LH