Removal [10/2020 - 11/2021]: Procedure

Refer to REMOVAL [10/2020 - 11/2021]

1. Remove the 2 clips.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Detach the clamp and remove the hood lock release lever protector.

1. Disconnect the connector.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   	Bolt
   	Connector

2. Remove the 3 bolts and engine hood courtesy switch (hood lock assembly) from the vehicle.
3. Disconnect the hood lock control cable assembly and hood lock control assembly from the engine hood courtesy switch (hood lock assembly) and then remove the engine hood courtesy switch (hood lock assembly).
   NOTE:

   Do not bend the hood lock control cable assembly excessively.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002