Installation [10/2023 - ]: Procedure

1. Install the stereo component equalizer assembly with the 2 nuts.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   	Nut
   	Connector

   HINT: 

   If the removed nut is the same shape as that shown in the illustration, replace it the supplied replacement part.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Torque: 7.5 N.m (76 kgf/cm, 66 in.lbf) 

2. Connect the connector.

Refer to INSTALLATION [10/2023 - ]

HINT: 

When replacing the stereo component equalizer assembly, perform ECU configuration.

Refer to ECU CONFIGURATION [10/2023 - ]