Removal [10/2023 - ]: Procedure
- PRECAUTION WARNING:
Be sure to read precaution thoroughly before servicing.
Refer to PRECAUTION [10/2023 - ]
NOTE:After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal.
- REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY
Refer to PROCEDURE - Step 25
- DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL
Refer to PROCEDURE - Step 4
- REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY
- for Fixed Seat Type:
Refer to REMOVAL [10/2023 - ]
- for Power Seat:
Refer to REMOVAL [10/2023 - ]
- for Fixed Seat Type:
- REMOVE REAR NO. 3 SPEAKER ASSEMBLY NOTE:
Do not touch the cone of the rear No. 3 speaker assembly.
- REMOVE INNER ROOF SIDE GARNISH ASSEMBLY LH (for 24 Speakers)
Refer to PROCEDURE - Step 33
- REMOVE INNER ROOF SIDE GARNISH ASSEMBLY RH (for 24 Speakers)
Refer to PROCEDURE - Step 34
- REMOVE NO. 2 PACKAGE TRAY TRIM PANEL ASSEMBLY (for 24 Speakers)
Refer to PROCEDURE - Step 29
- REMOVE REAR WINDOW SHADE ASSEMBLY (for 24 Speakers)
Refer to PROCEDURE - Step 30
- REMOVE SPEAKER ASSEMBLY WITH BRACKET (for 24 Speakers) NOTE:
Do not touch the cone of the speaker assembly with bracket.