DTC C2A6C: Side Camera RH Response Malfunction [10/2017 - 10/2020]: Procedure

1. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [10/2017 - 10/2020]

   Chassis > Panoramic View Monitor > Clear DTCs 

2. Check for DTCs.

   Refer to DTC CHECK / CLEAR [10/2017 - 10/2020]

   Chassis > Panoramic View Monitor > Trouble Codes 

   OK

   DTC C2A6C is not output.

   Result

   Proceed to
   OK
   NG

Result: 

OK 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2017 - 09/2018]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [09/2018 - 09/2019]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [09/2019 - 10/2020] 

Result: 

NG 

See step  2

1. Replace the side television camera assembly RH with a new or normally functioning one.

   Refer to REMOVAL [10/2017 - 10/2020]

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  3

1. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [10/2017 - 10/2020]

   Chassis > Panoramic View Monitor > Clear DTCs 

2. Check for DTCs.

   Refer to DTC CHECK / CLEAR [10/2017 - 10/2020]

   Chassis > Panoramic View Monitor > Trouble Codes 

   OK

   DTC C2A6C is not output.

   Result

   Proceed to
   OK
   NG

Result: 

OK 

END (SIDE TELEVISION CAMERA ASSEMBLY RH IS DEFECTIVE) 

Result: 

NG 

REPLACE PARKING ASSIST ECU. Refer to  REMOVAL [10/2017 - 10/2020]