LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> LS 500h AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Monitor System - Service Information (3 Of 3) >> FRONT SIDE RADAR SENSOR (w/o Front LiDAR Sensor) >> Removal [10/2023 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed, installed or replaced during the front side radar sensor removal/installation are shown below.

NECESSARY PROCEDURE AFTER PARTS REMOVED/INSTALLED/REPLACED

Replaced Part or Performed Procedures Necessary Procedures Effect/Inoperative Function When Necessary Procedures are not Performed Link
Front bumper assembly (Including removal and installation) Front television camera view adjustment Panoramic view monitor system Refer to CALIBRATION [10/2023 - ]
Front side radar sensor ECU configuration - Refer to ECU CONFIGURATION [10/2023 - ]
Adjust front side radar sensor
  • Front Camera System
  • Front Side Radar Sensor System
 for Target Adjustment (Triangle Target):
Refer to TARGET ADJUSTMENT (TRIANGLE TARGET) [10/2023 - ] 
for Driving Adjustment:
Refer to DRIVING ADJUSTMENT [10/2023 - ] 
for ECU Data Save/write:
Refer to ECU DATA SAVE/WRITE [10/2023 - ] 
scientia non olet · About LEMON Manuals