Caution / Notice / Hint

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed, installed or replaced during the television camera assembly removal/installation are shown below.

NECESSARY PROCEDURE AFTER PARTS REMOVED/INSTALLED/REPLACED

Replaced Part or Performed Procedures	Necessary Procedures	Effect/Inoperative Function when Necessary Procedures are not Performed	Link
Rear television camera assembly (Including removal and installation)	Rear television camera view adjustment Rear television camera view adjustment (for Rear camera detection system)	Parking support alert system Parking support brake system Panoramic view monitor system	w/ Advanced park: - w/o Advanced park: Refer to CALIBRATION [10/2017 - 11/2021]
Front television camera assembly, front bumper assembly or radiator grille Rear television camera assembly Side television camera assembly LH or outer rear view mirror assembly LH Side television camera assembly RH or outer rear view mirror assembly RH	Television camera view adjustment Rear television camera view adjustment (for Rear camera detection system)	Panoramic view monitor system	w/ Advanced park: - w/o Advanced park: Refer to CALIBRATION [10/2017 - 11/2021]
When the luggage compartment door is opened using a mechanical key	Initialize luggage closer motor assembly	The power trunk lid does not operate	Refer to INITIALIZATION [10/2020 - 10/2023]