LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> LS 500h AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Monitor System - Service Information (2 Of 3) >> TELEVISION CAMERA (for Front) >> Removal [11/2021 - 10/2023] >> Caution / Notice / Hint

Caution / Notice / Hint

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed, installed or replaced during the front television camera assembly removal/installation are shown below.

NECESSARY PROCEDURE AFTER PARTS REMOVED/INSTALLED/REPLACED

Replaced Part or Performed Procedures Necessary Procedures Effect/Inoperative Function When Necessary Procedures are not Performed Link
Front bumper assembly (Including removal and installation) w/ Advanced Drive: 
  1. Adjust front LiDAR advanced drive sensor assembly
  • Advanced drive system
  • Front LiDAR system
 Refer to ADJUSTMENT [11/2021 - ]
Front television camera assembly (Including removal and installation) Front television camera view adjustment Panoramic view monitor system w/ Advanced park:
Refer to CALIBRATION [11/2021 - 10/2022] , or refer to CALIBRATION [10/2022 - 10/2023]
w/o Advanced park:
Refer to CALIBRATION [11/2021 - 10/2022] , or refer to CALIBRATION [10/2022 - 10/2023]
scientia non olet · About LEMON Manuals