LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> LS 500h AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Monitor System - Service Information (1 Of 3) >> Clearance Warning Ecu >> Removal [11/2021 - 10/2022] >> Caution / Notice / Hint

Caution / Notice / Hint

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed, installed or replaced during the clearance warning ECU assembly removal/ installation are shown below.

NECESSARY PROCEDURE AFTER PARTS REMOVED/INSTALLED/REPLACED

Replaced Part or Performed Procedures Necessary Procedures Effect/Inoperative Function when Necessary Procedures are not Performed Link
Clearance warning ECU assembly
  • Ultrasonic sensor detection angle
  • Registration of bumper type
  • Ultrasonic sensor detection angle registration
  • Parking support alert system
  • Parking support brake system
  • Advanced park
 w/ Advanced park:
Refer to CALIBRATION [11/2021 - 10/2022]
w/o Advanced park:
Refer to CALIBRATION [11/2021 - 10/2022]
When the luggage compartment door is opened using a mechanical key Initialize luggage closer motor assembly The power trunk lid does not operate Refer to INITIALIZATION [10/2020 - 10/2023]
scientia non olet · About LEMON Manuals