Caution / Notice / Hint
NOTE:
- When using the Techstream with the power switch off to troubleshoot:
Connect the Techstream to the vehicle, and turn a courtesy light switch on and off at 1.5 second intervals until communication between the Techstream and vehicle begins.
- Inspect the fuses for circuits related to this system before performing the following inspection procedure.
- Before replacing the certification ECU (smart key ECU assembly) or immobiliser code ECU, refer to the smart access system with push-button start (for start function).
HINT:
When the communication between the ID code box (immobiliser code ECU) and certification ECU (smart key ECU assembly) stops, DTC B2785 is also stored.