LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> LS 500h AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Monitor System - Service Information (1 Of 3) >> ULTRASONIC SENSOR (for Front) >> Removal [10/2020 - 11/2021] >> Caution / Notice / Hint

Caution / Notice / Hint

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed, installed or replaced during the front ultrasonic sensor removal/installation are shown below.

NECESSARY PROCEDURE AFTER PARTS REMOVED/INSTALLED/REPLACED

Replaced Part or Performed Procedures Necessary Procedures Effect/Inoperative Function When Necessary Procedures are not Performed Link
Ultrasonic sensor
  • Ultrasonic sensor detection angle
  • Ultrasonic sensor detection angle registration
  • Parking support alert system
  • Parking support brake system
  • Advanced park
 w/ Advanced park:
-
w/o Advanced park:
Refer to CALIBRATION [10/2020 - 11/2021]
Front bumper assembly (Including removal and installation) Front television camera view adjustment Panoramic view monitor system w/ Advanced park:
-
w/o Advanced park:
Refer to CALIBRATION [10/2017 - 11/2021]
w/ Advanced Drive: 
  1. Adjust front LiDAR advanced drive sensor assembly
  • Advanced drive system
  • Front LiDAR system
 -
scientia non olet · About LEMON Manuals