LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> LS 500h AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Theft Deterrent System - Service Information >> ELECTRICAL KEY OSCILLATOR (for Outside Luggage Compartment) >> Removal [10/2023 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed, installed or replaced during the electrical key antenna removal/installation are shown below.

NECESSARY PROCEDURES AFTER PARTS REMOVED/INSTALLED/REPLACED

Replacement Part or Procedure Necessary Procedures Effect/Inoperative Function When Necessary Procedures are not Performed Link
Disconnect cable from negative (-) auxiliary battery terminal Operate the multiplex network master switch assembly (retractable outer mirror switch) to extend and retract the outer rear view mirror assembly Parking support brake system Refer to INITIALIZATION [10/2022 - ]
Initialize rear door sunshade system Rear door sunshade system Refer to INITIALIZATION [10/2017 - ]
Rear bumper assembly (Including removal and installation) w/ Advanced Drive: 
  1. Adjust rear LiDAR advanced drive sensor assembly
  • Advanced drive system
  • Rear LiDAR system
Refer to ADJUSTMENT [11/2021 - ]

HINT: