LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> LS 500h AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Theft Deterrent System - Service Information >> DIGITAL KEY RECEIVER (for Outside Luggage Compartment) >> Removal [10/2023 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during BLE digital key receiver assembly removal/installation are shown below.

NECESSARY PROCEDURES AFTER PARTS REMOVED/INSTALLED/REPLACED

Replaced Part or Performed Procedures Necessary Procedures Effect/Inoperative Function when Necessary Procedures are not Performed Link
Disconnect cable from negative (-) auxiliary battery terminal Operate the multiplex network master switch assembly (retractable outer mirror switch) to extend and retract the outer rear view mirror assembly Parking support brake system Refer to INITIALIZATION [10/2022 - ]
Initialize rear door sunshade system Rear door sunshade system Refer to INITIALIZATION [10/2017 - ]
BLE digital Key Receiver Assembly Perform code registration
  • Wireless Door Lock Control System
  • Smart access system with push-button start
  • Hybrid control system cannot be started
  • Digital Key System
w/ Front LiDAR Sensor:
Refer to REGISTRATION [10/2023 - ]
w/o Front LiDAR Sensor:
Refer to REGISTRATION [10/2023 - ]

HINT: