LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> LS 500h AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Theft Deterrent System - Service Information >> DIGITAL KEY RECEIVER (for Front Floor) >> Removal [10/2023 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during ble indoor digital key receiver assembly removal/installation are shown below.

NECESSARY PROCEDURE AFTER PARTS REMOVED/INSTALLED/REPLACED

Replaced Part or Performed Procedures Necessary Procedures Effect/Inoperative Function when Necessary Procedures are not Performed Link
BLE indoor digital key receiver assembly Perform code registration
  • Wireless Door Lock Control System
  • Smart access system with push-button star
  • Hybrid control system cannot be started
  • Digital Key System
 w/ Front LiDAR Sensor:
Refer to REGISTRATION [10/2023 - ]
w/o Front LiDAR Sensor:
Refer to REGISTRATION [10/2023 - ]
scientia non olet · About LEMON Manuals