Inspection [10/2020 - ]: Procedure
- INSPECT LUGGAGE DOOR CLOSER ASSEMBLY
- Check the close operation of the luggage door closer assembly.
- Set the luggage door closer assembly to the half-latch position.
*a Component without harness connected
(Luggage Door Closer Assembly)*b Full latch *c Half-latch *d Open latch - Apply auxiliary battery voltage to the luggage door closer motor and check the operation of the luggage door closer motor.
OK
Tester Connection Specified Condition L12-8 (M+) - Auxiliary battery positive (+)
L12-1 (M-) - Auxiliary battery negative (-)Moves to full latch position HINT:
If the result is not as specified, replace the luggage door closer assembly.
- Set the luggage door closer assembly to the half-latch position.
- Check the open operation of the luggage door closer assembly.
- Set the luggage door closer assembly to the full-latch position.
- Apply battery voltage to the luggage door closer motor and check the operation of the luggage door closer motor.
Standard Resistance
Tester Connection Specified Condition L12-1 (M-) - Auxiliary battery positive (+)
L12-8 (M+) - Auxiliary battery negative (-)Moves to open latch position HINT:
If the result is not as specified, replace the luggage compartment door lock assembly.
- Check the close operation of the luggage door closer assembly.