DTC C1413: Front Speed Sensor RH Output Malfunction; DTC C1414: Front Speed Sensor LH Output Malfunction [12/2017 - 09/2018]: Description
The speed sensor detects wheel speed and sends the appropriate signals to the skid control ECU (brake actuator assembly). These signals are used for brake control.
Speed sensor rotors have rows of alternating N and S magnetic poles, and their magnetic fields change when the rotors turn.
Each speed sensor detects that magnetic change and sends a pulse signal to the skid control ECU (brake actuator assembly).
HINT:
When the connectors between the speed sensor and skid control ECU (brake actuator assembly) are connected, the following waveform is output.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
| C1413 | Front Speed Sensor RH Output Malfunction | Any of the following is detected:
|
|
- |
| C1414 | Front Speed Sensor LH Output Malfunction | Any of the following is detected:
|
|
- |
- *1: for AWD
- *2: for 2WD
C1413 DTC DETECTION CONDITIONS
| Vehicle Condition | ||||
|---|---|---|---|---|
| Pattern 1 | Pattern 2 | Pattern 3 | ||
| Diagnosis Condition | - | - | - | - |
| Malfunction Status | An open in the sensor signal circuit of a malfunctioning area occurs 255 times or more | ◦ | - | - |
| At a vehicle speed of 20 km/h (12 mph) or more, noise occurs in the sensor signals of a malfunctioning wheel 75 times or more within 5 seconds | - | ◦ | - | |
| At a vehicle speed of 10 km/h (6 mph) or more, noise occurs once per rotor rotation | - | - | ◦ | |
| Detection Time | - | - | 15 seconds or more. | |
| Number of Trips | 1 trip | 1 trip | 1 trip | |
HINT:
DTC will be output when conditions for either of the patterns in the table above are met.
C1414 DTC DETECTION CONDITIONS
| Vehicle Condition | ||||
|---|---|---|---|---|
| Pattern 1 | Pattern 2 | Pattern 3 | ||
| Diagnosis Condition | - | - | - | - |
| Malfunction Status | An open in the sensor signal circuit of a malfunctioning area occurs 255 times or more | ◦ | - | - |
| At a vehicle speed of 20 km/h (12 mph) or more, noise occurs in the sensor signals of a malfunctioning wheel 75 times or more within 5 seconds | - | ◦ | - | |
| At a vehicle speed of 10 km/h (6 mph) or more, noise occurs once per rotor rotation | - | - | ◦ | |
| Detection Time | - | - | 15 seconds or more. | |
| Number of Trips | 1 trip | 1 trip | 1 trip | |
HINT:
DTC will be output when conditions for either of the patterns in the table above are met.