DTC C0063-28: Yaw Rate Sensor Signal Bias Level Out of Range / Zero Adjustment Failure; DTC C0063-96: Yaw Rate Sensor Component Internal Failure [09/2018 - 10/2023]: Description
These DTCs are stored when the skid control ECU (brake actuator assembly) receives an internal malfunction signal from the acceleration sensor (yaw rate sensor).
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Note |
|---|---|---|---|---|
| C0063-28 | Yaw Rate Sensor Signal Bias Level Out of Range / Zero Adjustment Failure | With the vehicle stationary, the yaw rate sensor output value is not 0°/s. | Yaw rate sensor | - |
| C0063-96 | Yaw Rate Sensor Component Internal Failure | A data malfunction signal is received from a yaw rate sensor. | Yaw rate sensor | - |