LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2020 >> LC 500 >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Electronically Controlled Brake System - Diagnostic Codes (Coupe) (2 Of 4) >> Electronically Controlled Brake System >> DTC C1247: Stroke Sensor; DTC C1392: Zero Point Calibration of Stroke Sensor undone [09/2018 - ] >> Caution / Notice / Hint

Caution / Notice / Hint

NOTE:

When replacing the skid control ECU assembly, brake actuator assembly or brake pedal stroke sensor assembly, perform initialization and calibration of the linear solenoid valve.

Refer to INITIALIZATION [03/2017 - ]

HINT: 

Check the condition of each related circuit connector before troubleshooting.

Refer to ELECTRONIC CIRCUIT INSPECTION PROCEDURE [03/2017 - ]